InfraredCamera / Optical Lens – Automatic Ultrasonic Cleaning Machine with Ultrasonic Cleaning,Slow-Rise Watermark-Free Dehydration, and Hot Air Drying
Infrared Camera & Optical Lens AutomaticUltrasonic Cleaning and Drying Machine
—Nano‑Level Cleanliness & Zero‑Damage Coating Cleaning Solution
Product Positioning
Thishigh‑precision automatic cleaning equipment is designed for infrared cameras(IR‑cut filters, infrared sensors) and optical lenses (glass/plastic lenses,prisms, lens assemblies). It integrates three core modules: high‑frequencyultrasonic cleaning, slow‑rise watermark‑free dehydration, and clean hot airdrying. With this system, it achieves a 99.95% impurity removal rate and surfaceroughness control (Ra ≤ 0.1nm) for dust particles (≥0.1μm),fingerprint grease, coating residues, infrared coating contaminants, and othersurface soils on lenses.
Theequipment features 128 fully automatic process recipes, suitable forsmall‑batch and multi‑variety production (5–100 pieces per batch). It satisfiesthe ultra‑high cleanliness requirements for infrared camera module packagingand optical lens coating/lamination. After cleaning, the lens surface tensionreaches ≥72mN/m, and particle residue is ≤2 particles per piece (0.1μm level). Thissignificantly improves infrared imaging clarity and coating yield (defect ratereduced by 65%).
---
Core Technical Advantages
1. High‑Frequency Ultrasonic PrecisionCleaning System (Optical‑Grade Technology)
Nano‑scaleNon‑Destructive Cleaning Process
- 80kHz purehigh‑frequencyultrasound (power adjustable 100–300Wdynamically)
- Cavitation bubble diameter ≤30μm.Combined with ±2kHz sweep technology, it achieves damage‑free cleaning of lensedges (1mm area) and inverted foot surfaces.
- Surface scratch rate: <0.01%(traditional low‑frequency ultrasonics: >0.5%).
- Forinfrared filters’ anti‑reflective coatings (e.g., silicon‑based infraredfilms), the ultrasonic power is automatically limited to ≤200W,resulting in a coating damage rate <0.05% while maintaining aninfrared light transmittance of >95%.
IntelligentTemperature‑Controlled Cleaning
- Bathtemperature range: 30–50°C (accuracy ±0.5°C).
- Withneutral cleaning agent (pH 6.5–7.5) and constant temperature, 98% of UV adhesive residues (e.g.,OCA optical adhesive traces) are dissolved within 10 minutes.
- Tankmaterial: All‑polypropylene (PP) sheet welding (thickness 8mm),lined with a silicone buffer layer (hardness 30 Shore A) to avoid metal ioncontamination and mechanical collision damage.
2. Four‑Stage Precision Filtration
Thefiltration system consists of four stages in sequence:
- Primarystage: A 100μm stainless steel strainer removes lens‑boxdebris and shipping dust (filtration accuracy ≤100μm).
- Intermediatestage: A 5μm sintered metal cartridge captures Al₂O₃ powder residues left over from the grinding process (filtrationaccuracy ≤5μm).
- Advancedstage: An activated carbon fiber felt adsorbs dissolved organic matter,achieving TOC ≤5ppb (filtration accuracy ≤1μm).
- Finalstage: A 0.1μm pleated cartridge ensures that the particle count in the cleaningsolution is ≤5particles/mL at the 0.1μm level.
