FullyAutomatic Ultrasonic Cleaning Machine / Precision Hardware (Camera ModuleFrame) Cleaning

2026-04-27 15:41

FullyAutomatic Ultrasonic Cleaning Machine / Precision Hardware (Camera ModuleFrame) Cleaning

Core Technical Advantages

Micron-LevelCleaning Power, Adaptable to Complex Structures

- UltrasonicCavitation Effect: Utilizes 40kHz/60kHz dual-frequency switching technologycombined with a 200W/m² high-density transducer array to generate cavitation bubbles (5–50μm in diameter) in the liquid. Uponcollapse, these bubbles release an instantaneous high pressure of 100 MPa,penetrating slits and blind holes smaller than 0.1mm (e.g., CNC machininggrooves and coating slots in camera frames) to remove submicron-scale contaminants.

- CombinedCleaning Process:

  - Rough Cleaning Stage: Uses 50–60°C alkaline cleaning agents (compatible with pretreatment for ceramicconversion coating / anodizing), combined with mechanical brushing to removestubborn cutting fluids.

  - Fine Cleaning Stage: Performs ultrasonicrinsing with deionized (DI) water, paired with megasonic waves (800kHz) todislodge nanoscale particles (removal rate for ≥5μm impuritiesreaches 99.8%).

  - Drying Stage: Employs hot air circulation(70–80°C) + air knife blowing to achieve a watermark-free surface.

FullyAutomated Process, 30% Productivity Improvement

- IntelligentControl System: Equipped with PLC + human-machine interface (HMI), supports QRcode scanning to input workpiece models (e.g., different frame sizes foriPhone/Motorola), automatically matching cleaning parameters (time,temperature, frequency). Model changeover time is less than 3 minutes.

- High-SpeedConveyor System: Uses stainless steel chain-driven transmission (speedadjustable from 0.5–2 m/min), with a single-batch processing capacity of 500–1,000 pieces, suitable for 24/7 continuous production.

- FaultSelf-Diagnosis: Real-time monitoring of liquid level, temperature, andultrasonic power; automatically stops operation and pushes alarm messages tothe MES system in case of abnormalities.

EnvironmentallyFriendly and Energy-Efficient Design, Compliant with Industry Standards

- CleaningAgent Recycling: Equipped with an oil-water separator (oil removal efficiency ≥95%) and a filtrationsystem (5μm precision filter element), reducingcleaning agent consumption by 30%.

- LowNoise and Low Power Consumption: Overall noise <75 dB, power consumption ≤30 kW (20% moreenergy-efficient than similar equipment), compliant with GB/T 23331 energymanagement system requirements.

- MaterialSafety: The tank body is made of SUS316L stainless steel (inner wallelectropolished), resistant to acid and alkali corrosion, and compatible withvarious water-based cleaning agents.


Phone:86015990195015
Wecha
扫码咨询